do you need a battery backup for sump pump

Then grab the ropes above the battery and take it out without damaging the box. The battery sensor checks the fluid level inside the battery, and just pulling the yellow cap towards the outside will detach it. In the same way, you will have to remove the negative terminal. At first, you need to disconnect the positive terminal by rotating the bolt anticlockwise. Those connecting wires are the positive terminal, negative terminal, and the battery sensor with a green cable and a yellow cap. Step-2: Detach the Wired Battery Connection and Take the Battery OutĪfter opening the battery box properly, you will find three connecting wires attached to the battery body. Then you need to open the box from both the front and backside. Turn the battery connection switch from there, and the annoying beeping sound will stop as well. In the whole backup battery system, there will be a battery in the box and a charger with various buttons and indications. Now, the steps to follow for replacing the sump pump backup battery are: Step-1: Turn Off the Battery Connection Switch and Open the Battery Box Along with that, the sump pump battery replacement cost will also lessen if you do so by yourself. If you follow the correct procedure, the battery replacement task will be a whole lot easier that it sounds. If the battery problem is fatal, you need to replace the old battery with a new one with the same capacity. The Step-by-Step Process to Follow for Sump Pump Battery Replacement Check the battery properly, and if there is a complex problem and the battery is old, you should replace it as soon as possible. You need to take the battery out of the box and disconnect the wired connections and sensor.

There will also be a red-light indication which points to the possible battery problem. You will also see two red lights turning on and off in a cycle along with the beep. When the backup battery isn’t working, a screeching beep sound will continuously keep coming. The battery gets recharged automatically when the power in your house is on.ĭamages in the battery can happen at any time because of the cell malfunctioning and other reasons. When fully charged the battery, it lasts for five to seven hours and sometimes even longer than that. Only when electricity won’t be available, the backup battery come into the game. You won’t always have to use this backup battery to pump water out from the basement. But the time may get shortened if you use that backup battery recklessly without any care. Usually, the sump pump battery backup life expectancy is about three to five years. 5 Final Thoughts When the Replacement of the Sump Pump Battery is Required.4 How to Replace & Disconnect Sump Pump Battery – The Basement Watch Dog System.3.2 How often will I have to change the battery fluid inside the sump pump backup battery?.3.1 How many hours will the charge of the backup battery last if there is no electricity for a while?.2.4 Step-4: Place the New Battery Inside the Box and Establish Connection.2.2 Step-2: Detach the Wired Battery Connection and Take the Battery Out.2.1 Step-1: Turn Off the Battery Connection Switch and Open the Battery Box.2 The Step-by-Step Process to Follow for Sump Pump Battery Replacement.1 When the Replacement of the Sump Pump Battery is Required.

Do you need a battery backup for sump pump